(3450) - CASE IH ROUND TIE BALER (1/83-12/89) (62) - PICKUP, PRIOR TO P.I.N. 001280 Case Agriculture

发表于 2022-10-16 03:10:01

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	488837C1	[8]	SPRING NUT	IH - speed, 5/16 inch
2.	ZA104585	[1]	FILLER	IH - right
3.	102393	[12]	WASHER	IH - flat, 11/32 x 11/16 x 1/16 inch (8 x 17 x 1 mm) Superseded by part number: 120393
4.	ZA104276	[1]	BAND	IH - end right
5.	113-257	[44]	BOLT,Hex, 3/8" - 16 x 2-1/2", Gr 5	CAS - hex, 3/8 NC x 2-1/2 inch Superseded by part number: 87936
. .	9413979	[44]	LOCK NUT,3/8"-16, GC	IH NUT - hex lock, 3/8 inch NC Superseded by part number: 232-4136
6.	120394	[44]	WASHER,3/8", SAE	IH WASHER - flat, 13/32 x 13/16 x 1/16 inch (10 x 20 x 1 mm) Superseded by part number: 87016
7.	ZA103012	[44]	TOOTH	IH FINGER - spring Superseded by part number: ZA106550
8.	ZA105424	[21]	TINE BAR	IH BAND (Replaces ZA104257)
9.	ZA104277	[1]	BAND	IH - end left
10.	ZA104584	[1]	FILLER	IH - left
11.	432-1628	[2]	COTTER PIN,1/4" x 1 3/4"	CAS Pin, Split (Cotter), 1/4" x 1 3/4" Superseded by part number: 87041
12.	22050R1	[1]	WASHER	IH - flat, 1-9/32 x 1-3/4 x 1/16 inch (32 x 44 x 1 mm) Superseded by part number: 87613234
13.	557995R11	[2]	COLLAR	IH - locking Superseded by part number: 47508396
14.	192450	[2]	SET SCREW,Hex Soc, 5/16"-18 x 5/16"	IH SCREW - Allen head cup point set, 5/16 NC x 5/16 inch Superseded by part number: 115321
15.	662649R1	[4]	RETAINER	IH HOUSING - bearing Superseded by part number: 84320112
16.	617667R92	[2]	BALL BEARING,31.75mm ID x 62mm OD x 18mm W	CAS - 1-1/4 inch ID (31 mm) Superseded by part number: 84484181
17.	ZA103775	[1]	REEL	IH - pickup
18.	ZA103757	[1]	FRAME	IH - pickup
19.	517645R11	[8]	COLLAR	IH - with set screw, locking Superseded by part number: 47577188
20.	102892	[8]	SET SCREW	IH - square head cup point set, 3/8 NC x 1/2 inch Superseded by part number: 87023136
21.	ZA105148	[4]	CLAMP	IH - spring finger
23.	ZA718159	[12]	PLATE	IH - bearing
24.	ZA761580	[16]	CAP	IH - bearing half (Center and right end of reel)
24.	ZA105582	[8]	BEARING HALF,1"	IH CAP - bearing half (Left end of reel)
25.	180137	[24]	BOLT,Hex, 3/8" - 16 x 2 3/4", Gr 5	IH - hex, 3/8 NC x 2-3/4 inch Superseded by part number: 113-248
26.	390305C1	[4]	WASHER	IH - flat hardened, 13/32 x 13/16 x 1/16 inch (10 x 20 x 1 mm) Superseded by part number: 87613282
27.	96339C1	[4]	CAMSHAFT BEARING,0.3752" ID x 1.25" OD x 0.8025"	IH - cam follower (Replaces ZA015882)
28.	24842R1	[4]	BOLT,Hex, 3/8" - 16 x 1 3/4", Gr 8	IH Superseded by part number: 326-628
29.	ZA105772	[1]	CAM	IH - pickup (Replaces ZA760048)
. .	219-8	[28]	LUBE NIPPLE,1/4" - 28 NPTF	CAS NIPPLE, LUBE, 1/4"-28 NPT x .54" lg Superseded by part number: 87414
30.	ZA105526	[4]	BAR	IH - pickup
31.	298274R1	[1]	BUSHING	IH SPACER - tube (Replaces 614614R1)
32.	ZA761609	[1]	SPROCKET ASSY.	IH SPROCKET - 20 teeth (Standard)
32.	ZA105596	[1]	SPROCKET ASSY.	IH SPROCKET - 15 teeth (Power reduction)
33.	ZA712225	[1]	SLIDE	IH - chain
34.	NSS	[1]	NOT SOLD SEPARAT	CON CHAIN ASSEMBLY (Use 33 links from roll marked 569089R91 1 offset link, 456929R91 and 1 connecting link 587372R91) (For power reduction use 31 links)
. .	456929R91	[1]	CHAIN LINK	IH LINK - offset Superseded by part number: 86595273
. .	587372R91	[1]	CONNECTING LINK	IH LINK - connecting Superseded by part number: 242-1310
. .	569089R91	[1]	CHAIN (AG),10' L, 1.0" Pitch	IH CHAIN - 10 foot (3.048 m) roll
. .	ZA105428	[1]	KIT	IH - pickup service, Includes: ref. nos. 6, 22, 24, 25, 27, 28, 29, 30, P/N 109454